USA Manufactured Open Cell Rubber
Typical Physical Properties (Class A Non-Oil Resistant)
PRODUCT DENSITY
THICKNESS WIDTH
POLYMER
Temperature Range
COMPRESSION
DEFLECTION
@25%
DENSITY
AV Pouds
per cubic foot
COMPRESSION SET @ 50% Deflection at 158ºF
ACCE;ERATED AGEING-% change in compression deflection at 158ºF
Soft
0625" - 1.0"
36"/54"
Natural Rubber
-20ºF to 160ºF
2-5 PSI
22
15% maximum
+/- 20%
Medium
"
"
"
"
5-10 PSI
26
"
"
Medium-Firm
"
"
"
"
10-16 PSI
30
"
"
Firm
"
"
"
"
16-22 PSI
33
"
"
Extra Firm
"
"
"
"
22+ PSI
36
"
"

Specifications are subject to change without notice. MSDS Sheets Available Upon Request


Production Rubber LLC
Phone: (802) 881-6358 | Fax: (we prefer email and PDFs) | Email: sales@ProductionRubber.com
Email us your complete business contact information when requesting
product information or pricing or use this convenient CONTACT FORM.
NOTE: The above technical information is based on manufacturer testing. Manufacturer believes these to be reliable. However, manufacturer, and Production Rubber, LLC have no control over the application of the material to, or part of, the final product and therefore, manufacturer and Production Rubber, LLC make NO EXPRESS OR IMPLIED WARRANTY OF RESULT, FITNESS OR MERCHANTABILITY. The customer should determine reliability for the end use or particular application. Plan for any contigencies in developing production and delivery dates.

Back to Home Page | Mouse Pad Material Photo Identifier

Terms and Conditions
Copyright (C) 2004-2017 Production Rubber, LLC. All rights reserved
Information on this website is subject to change without notice.


Charts and both technical and nontechnical information on this site are offered as guidelines
from our suppliers and manufacturers, and as such we assume no responsibility for their accuracy.
All logos, marks and other identifiers are owned by the copyright owners and/or are used by permission of the company who produced image.